SD430 drills through almost any conductive material including tungsten carbide, harness steel, iron, copper and brass.
SD430 opens small holes using hollow copper electrode diameter from 0.08mm to 4.00mm(0.003inch to 0.118inch) a high speed.(Max machining rate of 100mm(3.20inch)/min.)
With extremely low electrode wear(5-20%) in low wear machining, it delivers overwhelming cost effectiveness when compared with similar machines.
The versatile, swiveling and swinging head can easily open angle holes on flat, spherical and curved surfaces. If also works on pieces too large to be clamped to the worktable.
SD1M provides an EDM machining operation with an oil free, water-based dielectric fluid.
|